|
Whether you call them "D.I" units or "polishers", they are the same thing - a resin vessel containing a media which as the water passes through it reduces the total dissolved solids to give you very pure water for cleaning vehicles or windows.
10 Litre Polisher unit....£140.00 Plus VAT. Add to Cart
14 Litre Polisher unit...£160.00 Plus VAT. Add to Cart
Replacement resin is available - see Spares and Consumables page.
These are straightforward simple units, however the ongoing cost in resin changeovers can be prohibitive and if you intend using pure water in any quantity for any length of time then you would be as well to go for an R.O system which will cost more initially but is more economic in the long term - if you are unsure then give us a call for more advice.
Cost £495.00 Plus VAT Add to Cart
Description
The system includes a pressure cylinder containing 25 litres of deionised (DI) resin. This produces a 99.9% pure water when connected to any outside tap. Most pressures from a tap are sufficient to provide the right flow and volume of water necessary at the brush head.
The cylinder is mounted on two wheeled cart and the system comes complete with all hose connections, a 50 metre reel of hose and a total dissolved solids (TDS) monitor to measure the water purity.
Systems Contents
-
840 DI tank complete with inlet & outlet ports, riser tube & upper & lower distributors.
-
Trolley
-
2 x 25 litres of mixed bed resin.
-
TDS monitor
-
50 metres of hose on a thru cart.
-
2 x 2 metres of hose with fittings.
-
Tap connectors
|
